I have found that even different filaments can make a difference between this fitting and not. The IO cover and USB cover parts which slid into the back cover are quite thin and slide into a narrow slot. You will however need to have your printer fairly dialed in or otherwise go into the Onshape model and adjust some of the components. All of my models were printed in eSUN PLA-ST however any standard material like PETG, ASA or ABS should work fine. They are used for alignment reference only and are not present in the exported STL files. Please consult the above links for full details on these models. This CAD model includes third-party models subject to their own licenses for aligning the components. This model is provided under the CC BY-SA 4.0 license. They are all in the correct orientation for printing. A full CAD model is available in Onshape here:Įxported STL versions of these files can be found in the stl directory of this repository. The enclosure to holds a Raspberry Pi 4, IQudio DAC+, the Raspberry Pi Touchscreen and a rotary encoder. This project is not affiliated with Plex or Plexamp in anyway. It includes a 3D printable enclosure and some software components which can be combined, with the off the shelf hardware to build the unit. I wanted a self-contained streamer for Plexamp which would let me navigate and select my music, control tracks with a rotary encoder and output to a reasonably good headphone amplifier, this project is the result.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |